STEP 1: Start by cleaning your cars or truck by hand in a shaded location. Wash the car extensively but do not dry it.
STEP 2: Spread out the wax/polish with the wheel, The key is to maintain the spinning pad alongside the car’s surface area to stay clear of swirl marks. The clear coat should start warming up, scratches will begin to disappear. the panel should start to lighten up then Relocate to the following panel and also repeat.
Technique Tip: The external side of the pad moves much faster, creating, even more, rubbing than the center, and also it usually brings much less gloss– a recipe for a shed finish. So be especially mindful around complex trim areas, such as washing machine nozzles, mirrors, emblems, and complicated bumper contours that can be polished making use of just the outer side of the pad.
STEP 3: Rinse the car once more manually, pay attention to the doors, trunk, and hood. Dry extensively.
STEP 4: Applying a layer of wax or Polish to the paint. Mount a soft foam pad on an orbital sander as well as use an approximate 60:40 mix of wax/Polish. Use the sander at a medium rate speed and move back-and-forth motion and with a light yet constant pressure.
STEP 5: While the wax is drying, clean up the various other locations of the cars or truck then remove the wax with a microfiber towel– bath towels or old clothes will work . Move the vehicle into the sunlight for a final examination.